Adjust room lighting so that it falls on the participants. Avoid direct light on the TV monitor. Light intensity on faces should be about 300 lux or more.

If an inverter type or brightness-adjustable type of fluorescent lamp is used, the sensitivity of the Remote Commander may deteriorate.

Installing the CommunicationTerminal and Camera

You can fix the Communication Terminal or the Camera to your chosen place of installation using the supplied Velcro.

1 Stick the supplied Velcro to the bottom of the Communication Terminal or Camera.

Bottom of the Communication

Terminal

Bottom of the Camera Unit

2 Stick another piece of Velcro to the installation place.

3 Install the Communication Terminal or the Camera on the installation place by securing the two pieces of Velcro.

Appendix

Videoconferencing Room Layout 179