Toshiba PCS-1, PCS-1P When the PCS-1/1Pis used as a receiving terminal via LAN

When the PCS-1/1P is used as a receiving terminal via LAN

Setting of “Monitor		Output	Resolution	Video	Picture quality
Out (or Sub Monitor		connector for a		frame
Out)” on the receiving		computer		rate
terminal		picture on
		receiving
When	When
		terminal
“Dual	“Dual
Monitor”	Monitor”
is set to	is set to
“Off”	“On”
VIDEO	–	VIDEO OUT	a	a	Outputs the signal by
OUT		MONITOR			converting a transmitted
		MAIN on the			VGA, SVGA or XGA signal
		PCS-P1/P1P			into a 4CIF signal. The
					original high-resolution
					picture cannot be obtained
					and details cannot be clearly
					seen. The number of frames
					displayed per second
					depends on the interface
					transmission rate. For
					example, one frame per
					second is obtained at 1 Mbps.
–	VIDEO	VIDEO OUT	a	a	Outputs the signal by
	OUT	MONITOR			converting a transmitted
		SUB on the			VGA, SVGA or XGA signal
		PCS-P1/P1P			into a 4CIF signal. The
					original high-resolution
					picture cannot be obtained
					and details cannot be clearly
					seen. The number of frames
					displayed per second
					depends on the interface
					transmission rate. For
					example, one frame per
					second is obtained at 1 Mbps.
RGB	RGB	RGB OUT on		a	Outputs the signal by
OUT	OUT	the PCS-P1/			converting a transmitted
		P1P			VGA, SVGA or XGA signal
					into an XGA signal. The
					high-resolution picture can
					be obtained. The number of
					frames displayed per second
					depends on the interface
					transmission rate. For
					example, one frame per
					second is obtained at 1 Mbps.

Conference Data 5: Chapter

Using Audio/Video Signal from the Connected Equipment for a Conference 121