Ending the Multipoint Videoconference

1 Press the CONNECT/DISCONNECT ( / ) button on the Remote Commander.

The following submenu appears.

Disconnect

Phone Book

Dial

Cancel

2 Use the V, v, B or b button to select “Disconnect”, then press the PUSH ENTER button.

The screen changes to the split window screen and the following menu appears. The location of the pictures in the split windows A to E (or A to C) is restored to that when the terminals were connected.

You can display the terminal names in this window if you set “Display Terminal Name” to “On” in the Multipoint Setup menu.

Picture A

Picture B

Picture C

Disconnect A

Disconnect B

Disconnect C

Disconnect D

Picture D

Picture E

Disconnect E

Disconnect All

Cancel

Local picrure

3 Use the V, v, B or b button to select the terminal to be disconnected, then press the PUSH ENTER button.

Disconnect A: Disconnects the terminal connected first.

Disconnect B: Disconnects the terminal connected second.

Disconnect C: Disconnects the terminal connected third.

Disconnect D: Disconnects the terminal connected fourth.

Disconnect E: Disconnects the terminal connected fifth.

Disconnect All: Disconnects all the terminals.

The selected terminal is disconnected.

You can disconnect all the terminals by pressing the CONNECT/ DISCONNECT ( / ) button again.

To cancel the disconnection

Select “Cancel” in step 3, then press the PUSH ENTER button.

148 Ending the Multipoint Videoconference