Note

When the remote videoconferencing system does not support the Audio Mode selected by the local site, the mode automatically switches to “G.711”.

Far End Camera Control

When the conference starts with a call from a remote party, selects whether to enable control of each other’s cameras from each other’s sites.

On: Enables control of each other’s cameras.

Off: Disables control of the remote party’s camera.

T.120 Data

Selects whether you conduct a data conference via the T.120 standard using NetMeeting.

On: Enables conduct of the T.120 data conference.

Off: Disables conduct of the T.120 data conference.

For details on the T.120 data conference, see “Conducting a Data Conference Using NetMeeting – T.120 Data Conference” on page 112.

Multipoint Setup Menu

The Multipoint Setup menu is used when you conduct a multipoint videoconference.

Note

The Multipoint Setup menu is available when the System has the optional PCS-320M1 H.320 MCU or PCS-323M1 H.323 MCU software installed.

Page 1/2

Multipoint Setup

Page: 1/2

 

 

Multipoint Mode

ISDNOff

 

Broadcast Mode

Split

 

Number of Lines

2Bx5

 

LAN Bandwidth

1024 Kbps

 

Restrict

Auto

 

 

Save

Cancel

Multipoint Mode

Selects whether you conduct a multipoint videoconference.

On: Conducts a multipoint videoconference.

Off: Does not conduct a multipoint videoconference.

Note

The Multipoint Mode can be selected with the initial Setup menu (page 60).

Broadcast Mode

Selects the broadcast mode.

Split: Displays the pictures of the terminals connected in split windows.

Voice Activate: Detects the terminal with the speaker with the loudest voice, and sends the picture of that terminal to all other terminals.

Number of Lines

Selects the ISDN channels and the number of remote points to be used for a multipoint videoconference.

1B × 5: Connects to five points via a 1B channel. (Six-point conference)

2B × 5: Connects to five points via 2B channels. (Six-point conference)

4B × 3: Connects to three points via 4B channels. (Four-point conference)

6B × 2: Connects to two points via 6B channels. (Three-point conference)

Note

Some of the above items are not available depending on the number of ISDN lines you are using.

Administrators System for Setup and Registration 2: Chapter

Registering Local Information 41