Connecting the External MCU
Connecting the external MCU (Multipoint Control Unit) enables conduct of a multipoint videoconference unless the MCU software is installed into the Communication Terminal.
LAN or ISDN
MCU
If the MCU for the ISDN connection is equipped with the chair control function, the chair control can be activated for up to 99 terminals connected. The chair control mode allows you to specify any terminal to display on the monitor screen, to broadcast the specified picture to all the terminals, or to broadcast the local picture to all the terminals.
1 Press the FAR/NEAR button on the Remote Commander.
The Display Control menu opens.
2 Use the V, v, B or b button to select “Chair Request” under “Broadcast Mode”.
Display Control
Display |
| Control | Broadcast Mode Terminal | ||||||
|
|
|
|
|
|
|
|
|
|
Far |
| Near |
| Chair |
|
|
|
|
|
| Camera |
| Request |
|
|
| 1 |
| |
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
3 Press the PUSH ENTER button on the Remote Commander.
150 Connecting the External MCU