To display the picture in full screen while the Camera menu is displayed, select “Adjustments”, then press the PinP button on the Remote Commander. To cancel the full screen mode, press the RETURN button or PinP button on the Remote Commander.
To adjust the focus automaticallyPress the number button 0 on the Remote Commander.
The “Auto Camera” indicator appears and the focus is automatically adjusted.
To adjust the focus manuallyPress the button on the Remote Commander repeatedly to move the focus point further away from the camera. The “Focus Far” indicator is displayed.
Press the button on the Remote Commander repeatedly to move the focus point closer to the camera. The “Focus Near” indicator is displayed.
To adjust the brightnessPress the number button 9 on the Remote Commander repeatedly to make the picture brighter. The “Brightness +” indicator is displayed.
Press the “7” button on the Remote Commander repeatedly to make the picture darker. The “Brightness
Use backlight compensation when shooting a subject with bright background. Each time you press the number button 8, the backlight compensation is activated or deactivated. When it is activated, the “Backlight On” indicator is displayed. When it is deactivated, the “Backlight Off” indicator is displayed.
Presetting the Angle and Zoom SettingsUp to six settings for camera angle and zoom can be registered in the preset memory. Once you have stored the settings, you can easily recall them to move the camera.
You can preset the settings in the monitor screen while in communication, and in the launcher menu while not in communication. You can also do so using the Camera menu.
To preset the setting in the monitor screen while in communication1 Select the camera whose camera angle and zoom setting you want to preset.
Press the FAR/NEAR button on the Remote Commander to open the Display Control menu, then select “Far” or “Near” under “Control”.
Videoconference Daily 3: Chapter
Adjusting the Camera 77