Toshiba PCS-1, PCS-1P ) button, mMENU button, oHELP button, fRETURN button, gPUSH ENTER button, nCONNECT/DISCONNECT, PinP (BACK SPACE) button, eArrow buttons (V/v/B/b)

cDISPLAY (CLEAR) button Switches the picture displayed on the monitor screen.

Deletes a line when used for character input.

dPinP (BACK SPACE) button Displays a window picture when pressed during communication.

Each time you press this button, the location of the window picture changes. Pressing the button displays the picture in full screen while the Camera menu opens.

When used for character input, deletes the character you entered last.

eArrow buttons (V/v/B/b)

Used to select the menu or make various settings in the menu. Also used for camera angle adjustment.

fRETURN button

Used to return to the previous layer in the menu.

gPUSH ENTER button

Executes the selection or setting in the menu and goes to the next layer.

hNumber (0-9, , ) buttons

Used to enter the letters or numerals of a telephone number, etc.

Used for focus, brightness and backlight compensation adjustments.

i@/1 (power on/off) button

Sets the Communication Terminal to standby mode when it is turned on. Turns on the Communication Terminal when it is in standby.

jZOOM (T/W) buttons Zooms in or out.

T:to enlarge the picture

W:to reduce the picture

kVIDEO INPUT SELECT (SYMBOL) button

Selects the video input signal. Each time you press the button, the input signal switches.

Used to enter a symbol for character input.

lFAR/NEAR (ALPHA/NUM) button Switches the picture on a local or remote site.

Switches the input mode between alphabets and numerals for character input.

mMENU button

Used to display a menu.

nCONNECT/DISCONNECT ( /) button

Used to connect or disconnect a remote party for a conference.

oHELP button

Used to show the help guide.

pBattery compartment (rear) Insert two size AA (R6) batteries.

158 Location and Function of Parts and Controls