Press the PUSH ENTER button on the Remote Commander. Select “Stop” from the displayed submenu with the V or v button, then press the PUSH ENTER button.
To cancel still image displayPress the PUSH ENTER button on the Remote Commander to display the submenu. Select “Clear” with the V or v button, then press the PUSH ENTER button.
Sending a Still Image Using the Communication SubmenuYou can easily send only one image displayed on the monitor screen as a still image during communication.
1 Press the PUSH ENTER button on the Remote Commander during communication.
The Communication submenu appears.
Send
Save
Presentation START
Whiteborad ON
Indicator OFF
End
2 Press the V or v button on the Remote Commander to select “Send”, then press the PUSH ENTER button.
The motion picture displayed on the local monitor screen freezes, and a still picture is sent to the remote party. When transmission is finished, the message “The still image has been sent.” appears.
To cancel still image display
Press the PUSH ENTER button on the Remote Commander to display the communication submenu. Select “Clear” with the V or v button, then press the PUSH ENTER button. When a still image is displayed on the monitor screen, the “Send” indication changes to “Clear”.
To erase the communication submenuSelect “End” from the menu, then press the PUSH ENTER button.
When you are receiving a still imageYou cannot send a still image to the remote party. Select “Clear”, then send the still image.
Equipment Optional With Videoconference 4: Chapter
Sending Motion Pictures as Still Images 93