Preparing the System

Inserting Batteries into the Remote Commander

Most of the operations with the Video Communication System can be controlled with the supplied Remote Commander.

1 Remove the battery compartment cover.

2 Insert two size AA (R6) batteries (supplied) with correct polarities into the battery compartment.

Caution

Be sure to insert the batteries E side first. Inserting them forcibly e side first may damage the insulated film covering the batteries and cause a short circuit.

3 Replace the cover.

Battery life

When the Remote Commander does not function properly, replace both the batteries with new ones.

Notes on batteries

To avoid damage from possible battery leakage or corrosion, observe the following:

•Make sure to insert the batteries with the polarities in the correct direction.

•Do not mix old and new batteries, or different types of batteries.

•Do not attempt to charge the batteries.

•If you do not intend to use the Remote Commander for a long period of time, remove the batteries.

Preparation and Installation 1: Chapter

Preparing the System 21