Using a Convenient Menu Available during Communication — Communication Submenu

During communication with a remote party, pressing the PUSH ENTER button on the Remote Commander opens the communication submenu. The communication submenu allows you to perform operations often used during communication only by selecting the item in the menu.

Communication submenu

Send

 

Save

 

Presentation

START

Whiteboard

ON

Indicator

OFF

End

 

Selecting each item with the V or v button and pressing the PUSH ENTER button enables the following operations:

Send: Sends the picture displayed on the monitor screen as a still picture to a remote party.

After it is sent, this item changes to “Clear”. Selecting this item restores the motion picture shot by the camera.

Save: Saves the picture displayed on the monitor screen to a “Memory Stick” as a still picture.

Presentation SRART: Sends the RGB picture input from the optional PCS- DSB1 Data Solution Box to a remote party. After sending, the item changes to “Presentation STOP”. Selecting the item ends transmission of the RGB picture.

Displayed only when the Data Solution Box is connected to the Communication Terminal.

Whiteboard ON: Sends the notes written on a whiteboard with the mimio Xi attached. After sending, the item changes to “Whiteboard OFF”. Selecting the item ends transmission of the notes on the whiteboard.

Displayed only when the whiteboard with the mimio Xi installed is connected.

Indicator OFF: Shows the indicators on the monitor screen if they are not shown. While the indicators are shown, the item changes to “Indicator ON”, and selecting the item hides the indicators.

End: Clears the communication submenu.

100 Using a Convenient Menu Available during Communication — Communication Submenu