Message

Meaning

 

 

 

 

 

 

No Memory Stick.

Insert a “Memory Stick”.

 

 

 

 

 

 

Memory Stick write-protected.

Release the lock of the erasure prevention switch

 

 

 

on the “Memory Stick”.

 

 

 

 

 

 

Memory full.

The data has been saved in the “Memory Stick” to

 

 

 

its full capacity.

 

 

 

 

 

 

Memory Stick file error.

The file format of the “Memory Stick” is incorrect

 

 

 

or abnormal.

 

 

 

 

 

 

Memory Stick file decode error.

Decoding the JPEG file has failed.

 

 

 

 

 

 

Memory Stick size error.

The file size of the “Memory Stick” is not

 

 

 

acceptable.

 

 

 

 

 

 

There are no images recorded in the

No images are recorded in the “Memory Stick”.

 

 

Memory Stick.

 

 

 

 

 

 

 

File error.

There is an abnormality in the file.

 

 

 

 

 

 

File size error.

The file size is not acceptable.

 

 

 

 

 

 

File decode error.

Decoding the JPEG file has failed.

 

 

 

 

 

 

Format error.

The “Memory Stick” cannot be formatted.

 

 

 

 

 

 

Settings cannot be changed during

Change the setting after disconnecting the system.

 

 

communication.

 

 

 

 

 

 

 

The still images were not sent.

Transmission of the still images has failed.

 

 

 

 

 

 

The presentation screen can not be sent.

Transmission of the RGB data from the Data

 

 

 

Solution Box has failed.

 

 

 

 

 

 

Multipoint connection to this participant was

Multipoint connection with this party is not

 

 

not made.

available.

 

 

 

 

 

 

The LAN cannot be used.

You cannot use the LAN connection.

 

 

 

 

 

 

The DATA SOLUTION BOX cannot be

You cannot use the Data Solution Box connected.

 

 

used.

 

 

 

 

 

 

 

Unknown device is connected.

An unacceptable device is connected to the WHITE

 

 

 

BOARD connector.

 

 

 

 

 

 

ISDN UNIT is not available.

Communication with the ISDN unit cannot be

 

 

 

made.

 

 

 

 

 

 

No more cascade connections are enabled.

Installing the MCU software into three or more

 

 

 

Communication Terminals does not allow cascade

 

 

 

connection.

 

 

 

 

 

 

Cascade connection via ISDN is not

You cannot use cascade connection when your

 

 

 

 

 

available.

system is connected via ISDN.

 

 

 

 

 

 

 

 

 

 

 

 

Cannot send RGB data while receiving.

While you are receiving an RGB picture from

 

 

 

Appendix

 

another terminal, you cannot send an RGB picture

 

 

 

 

 

from equipment connected to the Data Solution

 

 

 

Box.

 

 

 

 

 

 

A still image is being sent or received. The

While you are sending or receiving a still image,

 

 

Data Solution Box is not usable.

you cannot send or receive the RGB picture via the

 

 

 

Data Solution Box.

 

 

 

 

 

 

On Screen Messages 163