DHCP Mode

Selects whether DHCP (Dynamic Host Configuration Protocol) server is enabled or not.

Auto: The IP address and network mask are automatically assigned.

In this case, confirm the assigned IP address, network mask, gateway address, and DNS address in the launcher menu or the Machine Information menu after the LAN connection is completed.

Off: Sets “DHCP Mode” to “Off”. In this case, enter the IP address, network mask, gateway address and DNS address.

Host Name

Enter the host name.

IP address

Enter the IP address.

Network Mask

Enter the network mask.

Gateway Address

Enter the default gateway address.

DNS Address

Enter the DNS (Domain Name System) address.

Page 2/5

LAN Setup

Page: 2/5

Gatekeeper Mode

Auto

Gatekeeper Address

User Alias

User Number

Save Cancel

Gatekeeper Mode

Sets whether you use the gatekeeper that controls access to a LAN.

Using the gatekeeper allows you to dial using the user name or user number. On: Enables use of the gatekeeper. Off: Disables use of the gatekeeper.

Auto: Detects the gatekeeper automatically and uses it.

Gatekeeper Address

Enter the gatekeeper address used when “Gatekeeper Mode” is set to “On”.

User Alias

Enter the user name (H.323 alias) to be registered in the gatekeeper.

User Number

Enter the user number (E.164 number) to be registered in the gatekeeper.

Page 3/5

LAN Setup

Page: 3/5

SNMP Mode

On

 

Trap Destination

 

 

Community

Public

 

Description

Videoconference Device

Location

 

 

Contact

 

 

 

Save

Cancel

SNMP Mode

Selects whether the SNMP (Simple Network Management Protocol) agent service is enabled or not.

On: Enables the SNMP agent service.

Off: Disables the SNMP agent service.

Trap Destination

Enter the address of the trap destination SNMP manager.

Community

Enter the community name managed by the SNMP manager. The default setting is “public”. Normally, there is no need to change.

Description

Enter the description of this terminal. The default setting is “Videoconference Device” and cannot be changed.

Location

Enter the location where this terminal is installed.

Administrators System for Setup and Registration 2: Chapter

Registering Local Information 49