6 F 3 B 0 3 6 2

5.Notes on laying and wiring AUI cable

a.When connecting the AUI cable to the MAU connectors, use the slide latches to secure the connectors firmly.

b.Contact the manufacturer of the cable with regard to the physical characteristics value of the AUI cable allowable minimum bending radius.

c.Avoid locations with high temperature, high humidity, dust, or oil mist when installing AUI cable.

6.Notes on MAU (10BASE5) installation

a.Attach MAUs at the 2.5-meter separated marks on the coaxial cable.

b.Since the procedure for attaching MAUs to coaxial cable differs between manufacturer, refer to the MAU user's manual.

c.Since the coaxial cable is grounded, the MAU main unit should be mounted insulated from ground.

d.Do not install MAUs in the vicinity of equipment that generates electrical noise. If a MAU must be installed in such a location, provide a MAU enclosure box, and mount the MAU inside the box insulated from that box. Be sure to ground the MAU enclosure box.

e.Avoid locations with high temperature, high humidity, dust, or oil mist when installing MAU cable.

168

Page 169
Image 169
Toshiba T2N instruction manual ⎯ 168 ⎯