6 F 3 B 0 3 6 2
The EACC LED indicates when the T2N is accessing the Ethernet Port.
|
|
| Table 8.3 States Indicated by the EACC LED |
|
|
| |
LED display | State |
| |
|
| ||
EACC (Access) | Indicates whether or not the T2N is accessing the Ethernet Port. | ||
| ∙ | Lit | The T2N is accessing the Ethernet Port. |
| ∙ | Off | The T2N is not accessing the Ethernet Port. |
∙ Lights after Ethernet Port initialization completes when power is first applied. (Access starts.)
If this LED does not light after power is turned on:
Verify that the T2N is correctly connected to the base unit.
If this LED does not light at above, then the T2N itself is defective. Replace the T2N.
Supplement:
We recommend keeping spares on hand to minimize the time required to determine the location of the fault using and to minimize the time required for recovery.
⎯ 142 ⎯
