6 F 3 B 0 3 6 2

CAUTION

1.Always turn off the power before attaching or removing modules, the terminal block, or cables.

Electrical shock, malfunctions, and breakdowns are possible if these operations are performed with the power on.

2.To keep the system operating normally at all times and to prevent trouble in advance, perform daily inspections, periodic inspections, and cleaning.

3.Refer to the section on error recovery in this document if the Ethernet Port does not operate correctly.

Contact your local Toshiba dealer or service representative if a breakdown occurs, and request that the module be repaired or returned to Toshiba.

Operation and safety cannot be guaranteed if service is performed by anyone other than an authorized Toshiba service representative.

4.Do not disassemble or modify the module hardware, and do not modify the module software. Breakdowns or malfunctions may lead to fire, electrical shock, or injury.

5.When measuring the voltages at the module terminal block during inspections, use adequate caution.

There is a danger of electrical shock during this operation.

6.Only exchange modules with the power completely off.

Exchanging modules with the power on can lead to malfunctions, breakdowns, and electrical shock.

7.Do not continue to use the module if it emits smoke or unusual odors, or if it is in an abnormal state of any type.

Using the module in an abnormal state can lead to malfunctions, breakdowns, and electrical shock.

In such cases, immediately turn of all power and contact your local Toshiba dealer or service representative.

Customers should never attempt repairs or modifications to this equipment themselves: repair and modification operations are extremely dangerous.

170

Page 171
Image 171
Toshiba T2N instruction manual ⎯ 170 ⎯