6 F 3 B 0 3 6 2

The Ethernet Port uses a priority ordering in processing sockets 1 through 8. Therefore, systems constructed so that socket 1 is activated frequently may not be able to process socket 8, resulting in the following error response:

Status: Send completion timeout (TermSTS = 06H)

When constructing a system, take the socket utilization conditions into account when allocating sockets. Since the send/receive processing for each socket requires about 50 ms, applications that issue send or receive requests to a given socket should leave an interval of at least 50 ms times the number of sockets used between each request.

(Interval between requests to the same socket) (Number of sockets used × 50 ms)

Similarly, the above intervals averaging 50 ms should be left between transmissions from remote ports to the local port.

(Interval between remote port transmissions) (Number of remote ports × 50 ms)

102

Page 103
Image 103
Toshiba T2N instruction manual ⎯ 102 ⎯