TP-Link H5R, H5S , 4.21.2 Diagnostic

H5R & H5E AV500 Hybrid Wi-Fi Starter Kit
- 111 -
2. Enter your local date in MM/DD/YY format.
3. Enter your local time in HH/MM/SS format.
4. Click Save.
To set time automatically:
1. Select your local time zone.
2. Enter the address or domain of NTP Server 1 or NTP Server 2.
3. Click the Get GMT button to get system time from Internet if you have connected to the
Internet.
To set Daylight Saving:
1. Check the box to enable Daylight Saving.
2. Select the start time from the drop-down lists in the Start field.
3. Select the end time from the drop-down lists in the End field.
4. Click Save.
Figure 4-114 Time settings
) Note:
1) This setting will be used for some time-based functions such as firewall. You must specify
your time zone once you log in to the router successfully, otherwise, these functions will not
take effect.
2) Time settings will be lost if the router is turned off.
3) The router will automatically obtain GMT from the Internet if it is configured accordingly.
4) The Daylight Saving will take effect one minute after the configurations are completed.
4.21.2 Diagnostic
Choose menu “System Tools → Diagnostic”, and then you can use the Ping or Traceroute
function to check connectivity of your network in the following screen.