TP-Link H5S, H5R manual II. Enter the client device’s PIN on the router

H5R & H5E AV500 Hybrid Wi-Fi Starter Kit

Figure 4-31 Add A New Device

Step 2: Press and hold the WPS button of the client device directly.

Step 3: The WPS LED blinks for two minutes during the Wi-Fi Protected Setup process.

Step 4: When the WPS LED is solid on, the client device has successfully connected to the router.

Step 5: Refer back to your client device or its documentation for further instructions.

II. Enter the client device’s PIN on the router

Use this method if your client device does not have the WPS button, but has a Wi-Fi Protected Setup PIN number.

Step 1: Keep the default WPS status as Enabled and click the Add device button in Figure 4-29,then Figure 4-32will appear.

Figure 4-32 Add A New Device

Step 2: Enter the PIN number from the client device in the field on the above WPS screen. Then click Connect button.

Step 3: “Connecting succeeded!” will appear on the screen of Figure 4-32,which means the client device has successfully connected to the router.

III. Enter the router’s PIN on your client device

Use this method if your client device asks for the router’s PIN number.

Step 1: On the client device, enter the PIN number listed on the router’s Wi-Fi Protected Setup screen, shown in Figure 4-29(It is also labeled on the bottom of the router).

Step 2: The WPS LED blinks for two minutes during the Wi-Fi Protected Setup process.

- 51 -