TP-Link H5S, H5R manual Wireless MAC Filtering

H5R & H5E

AV500 Hybrid Wi-Fi Starter Kit

•Key Type - You can select the WEP key length (64-bit, or 128-bit.) for encryption. "Disabled" means this WEP key entry is invalid.

64-bit - You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is not promoted) or 5 ASCII characters.

128-bit - You can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is not promoted) or 13 ASCII characters.

)Note:

If you do not set the key, the wireless security function is still disabled even if you have selected Shared Key as Authentication Type.

Be sure to click the Save button to save your settings on this page.

4.7.4Wireless MAC Filtering

Choose menu “Wireless → MAC Filtering”, and then you can control the wireless access by configuring the Wireless MAC Filtering function, shown in Figure 4-23.

Figure 4-37 Wireless MAC Filtering

¾Wireless MAC Filtering - Enable or disable wireless MAC filtering. To filter wireless users by MAC Address, click Enable. The default setting is Disabled.

¾MAC Address - The wireless station's MAC address that you want to filter.

¾Status - The status of this entry, either Enabled or Disabled.

¾Description - A simple description of the wireless station.

To Add a Wireless MAC Address filtering entry, click the Add New… button. The "Add or Modify Wireless MAC Address Filtering entry" page will appear, shown in Figure 4-24:

- 55 -