H5R & H5E AV500 Hybrid Wi-Fi Starter Kit

¾Gateway - This is the IP address of the gateway device that allows for contact between the router and the network or host.

¾Interface - This interface tells you either the Destination IP Address is on the LAN & WLAN (internal wired and wireless networks), or on the WAN (Internet).

4.18 Bandwidth Control

Figure 4-100 Bandwidth Control

There are two submenus under the Bandwidth Control menu as shown in Figure 4-100:Control Settings and Rules List. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below.

4.18.1 Control Settings

Choose menu “Bandwidth Control Control Settings”, and then you can configure the Egress Bandwidth and Ingress Bandwidth. For optimal control of the bandwidth, please select the right Line Type and ask your ISP for the total bandwidth of the egress and ingress.

Figure 4-101 Bandwidth Control Settings

¾Enable Bandwidth Control - Check this box so that the Bandwidth Control settings can take effect.

¾Line Type - Select the right type for you network connection. If you don’t know how to choose, please ask your ISP for the information.

¾Egress Bandwidth - The upload speed through the Internet port. Its value should be less than 1000000Kbps.

¾Ingress Bandwidth - The download speed through the Internet port. Its value should be less than 1000000Kbps.

- 102 -

Page 113
Image 113
TP-Link H5R, H5S manual Bandwidth Control, Control Settings