H5R & H5E AV500 Hybrid Wi-Fi Starter Kit
5.Enter the MAC address
6.Enter wireless station A/B in the Description field.
7.Select Enabled in the Status
8.Click the Save button.
9.Click the Back button.
The filtering rules that configured should be similar to the following list:
4.7.5 Wireless Advanced
Choose menu “Wireless → Wireless Advanced”, and then you can configure the advanced settings of your wireless network.
Figure 4-39 Wireless Advanced
¾Transmit Power - Here you can specify the transmit power of router. You can select High, Middle or Low which you would like. High is the default setting and is recommended.
¾Beacon Interval - Enter a value between 40 and 1000 milliseconds for Beacon Interval here. The beacons are the packets sent by the router to synchronize a wireless network. Beacon Interval value determines the time interval of the beacons. The default value is 100.
¾RTS Threshold - Here you can specify the RTS (Request to Send) Threshold. If the packet is larger than the specified RTS Threshold size, the router will send RTS frames to a particular receiving station and negotiate the sending of a data frame. The default value is 2346.
¾Fragmentation Threshold - This value is the maximum size determining whether packets will be fragmented. Setting the Fragmentation Threshold too low may result in poor network
- 57 -
