H5R & H5E AV500 Hybrid Wi-Fi Starter Kit
- 19 -
your country or region is not listed, please contact your local government agency for
assistance.
) Note:
Limited by local law regulations, version for North America does not have region
selection option.
¾ Mode - This field determines the wireless mode which the router works on.
z 11b only/11g only/11n only - Select the corresponding mode if you are using
802.11b, 802.11g or 802.11n wireless clients only.
z 11bg mixed – Select this mode if you are using both 802.11b and 802.11g wireless
clients.
z 11bgn mixed - Select this mode if you are using a mix of 802.11b, 11g, and 11n
wireless clients.
¾ Channel Width - Select any channel width from the drop-down list. The default setting
is “Auto”, which can adjust the channel width for your clients automatically.
¾ Channel - This field determines which wireless channel will be used. It is not necessary
to change the wireless channel unless you notice interference problems with another
nearby access point. If you select “Auto”, then the router will select the best channel
automatically.
¾ Wireless Security
z Disable Security - The wireless security function can be enabled or disabled. If
disabled, the wireless stations will be able to connect the router without encryption.
z Enable Security (WPA-PSK/WPA2-PSK) – It’s selected by default, with the
default PSK password the same as the default PIN code.
z No Change - If you choose this option, wireless security configuration will not
change.
7. Configure the basic parameters for 5GHz wireless network in the following screen as shown
in Figure 3-14, and then click Next.