
H5R & H5E AV500 Hybrid
| Off | The WAN port is not connected. | |
|
|
| |
(WAN) | On | The WAN port is connected. | |
|
| ||
Blink | The WAN port is transferring data. | ||
| |||
|
|
| |
| Off | No LAN port is connected. | |
(LAN) |
|
| |
On | At least one LAN port is connected. | ||
|
|
| |
| Off | The router hasn’t formed a powerline network. | |
|
|
| |
(Powerline) | On | The router has formed a powerline network. | |
|
| ||
Blink | The powerline network is transferring data. | ||
| |||
|
|
|
Table
)Note:
1)After a device is successfully added to the network by WPS function, the WPS LED will keep on for about 5 minutes and then turn off.
2)You can stop the WPS process as follows:
zIf you start the WPS process on the “Wireless 2.4GHz → WPS → Add a New Device” or “Wireless 5GHz → WPS → Add a New Device” page, you can click Stop on the current page to stop the process.
zIf you start the WPS process by pressing the router’s Reset/WPS button, you need to click Stop on both pages.
The WPS LED turns off after you stop the WPS process.
3)The router is set to working concurrently in 2.4GHz and 5GHz by default. If you desire to choose the working frequency, please refer to 4.5 Dual Band Selection.
¾Rear panel
Figure 1-2 Rear panel
- 5 -