TP-Link H5S, H5R manual Wi-Fi button

H5R & H5E AV500 Hybrid Wi-Fi Starter Kit

1.4.2H5E

¾Front panel

Wi-Fi button

					Figure 1-4 Front panel
Four LEDs and one button are located on the extender’s front panel.
	LED		Status			Description
			Off			The extender is off.
			Blink			The extender is performing AP clone with the AP
			Quickly			CLONE/PAIR button pressed.
	(Power)					The extender is performing AP clone without the AP
		Blink Slowly				CLONE/PAIR button pressed.
						The extender failed to perform AP clone.
			On			The extender is on or has completed AP clone.
			On			The extender is connected to a powerline network.
			Off			The extender isn’t connected to any powerline
	(Powerline)					network.
			Blink		The extender is transferring data.
			On			At least one Ethernet port is connected.
	(Ethernet)
			Off		No Ethernet port is connected.
			Off		The wireless function is disabled.
	(Wireless)
			Blink		The wireless function is enabled.
				Table 1-4 LED description
	Button					Description
	Wi-Fi button		Press this button for 5 seconds to enable or disable the wireless
			function.
			Table 1-5 Button description

- 7 -