TP-Link H5R, H5S manual Port Triggering, To add a new rule, follow the steps below

H5R & H5E

AV500 Hybrid Wi-Fi Starter Kit

Figure 4-69 Port Triggering

To add a new rule, follow the steps below.

1.Click the Add New… button, the next screen will pop-up as shown in Figure 4-70.

Figure 4-70 Add or Modify a Triggering Entry

¾Trigger Port - The port for outgoing traffic. An outgoing connection using this port will trigger this rule.

¾Trigger Protocol - The protocol used for Trigger Ports, either TCP, UDP, or All (all protocols supported by the router).

¾Incoming Port - The port or port range used by the remote system when it responds to the outgoing request. A response using one of these ports will be forwarded to the PC which triggered this rule. You can input at most 5 groups of ports (or port sections). Every group of ports must be separated with ",", for example, 2000-2038, 2046, 2050-2051, 2085, 3010-3030.

¾Incoming Protocol - The protocol used for Incoming Port, either TCP, UDP, or ALL (all protocols supported by the router).

¾Status - The status of this entry, Enabled means the Port Triggering entry is enabled.

¾Modify - To modify or delete an existing entry.

¾Common Applications - Some popular applications already listed in the drop-down list of Incoming Protocol.

- 78 -