TP-Link H5S manual H5R & H5E, II. Enter the client device’s PIN on the router

H5R & H5E

AV500 Hybrid Wi-Fi Starter Kit

Figure 4-16

Or you can keep the default WPS status as Enabled and click the Add device button in Figure 4-15.Then choose “Press the button of the new device in two minutes” and click Connect, shown in Figure 4-17.

Figure 4-17 Add A New Device

Step 2: Press and hold the WPS button of the client device directly.

Step 3: The WPS LED blinks for two minutes during the Wi-Fi Protected Setup process.

Step 4: When the WPS LED is on, the client device has successfully connected to the router.

Step 5: Refer back to your client device or its documentation for further instructions.

II. Enter the client device’s PIN on the router

Use this method if your client device does not have the WPS button, but has a Wi-Fi Protected Setup PIN number.

Step 1: Keep the default WPS status as Enabled and click the Add device button in Figure 4-15,then Figure 4-18will appear.

Figure 4-18 Add A New Device

Step 2: Enter the PIN number from the client device in the field on the above WPS screen. Then click Connect button.

- 39 -