H5R & H5E AV500 Hybrid Wi-Fi Starter Kit

your router is 192.168.1.x, the default LAN IP of the router will automatically switch from 192.168.1.1 to 192.168.0.1 to avoid IP conflict; in this case, please try net use \\192.168.0.1

/delete / yes.)

4.12 NAT

Choose menu “NAT”, and then you can disable or enable the NAT and Hardware NAT Control features. The NAT Rules and Hardware NAT will work properly only when the NAT Control feature is enabled.

Figure 4-65 NAT

¾Current NAT Status - If Enabled, the NAT function and the Forwarding configuration will take effect. If Disabled, neither NAT function nor Forwarding configuration will take effect

¾Current Hardware NAT Status - If Enabled, the Hardware NAT feature will take effect. If Disabled, the Hardware NAT feature will not take effect.

)Note:

The new settings will not take effect until the router reboots.

4.13 Forwarding

Figure 4-66 Forwarding menu

There are four submenus under the Forwarding menu (shown in Figure 4-66):Virtual Servers, Port Triggering, DMZ and UPnP. Click any of them, and you will be able to configure the corresponding function.

4.13.1 Virtual Servers

Choose menu “Forwarding Virtual Servers”, and then you can view and add virtual servers in the next screen (shown in Figure 4-67). Virtual servers can be used for setting up public

- 75 -

Page 86
Image 86
TP-Link H5S, H5R manual 12 NAT, Forwarding, Virtual Servers