TP-Link H5R, H5S manual Dhcp Settings

H5R & H5E AV500 Hybrid Wi-Fi Starter Kit

4.10 DHCP

Figure 4-48 DHCP menu

There are three submenus under the DHCP menu (shown in Figure 4-48),DHCP Settings, DHCP Clients List and Address Reservation. Click any of them, and you will be able to configure the corresponding function.

4.10.1 DHCP Settings

Choose menu “DHCP → DHCP Settings”, and then you can configure the DHCP Server on the page as shown in Figure 4-49.The router is set up by default as a DHCP (Dynamic Host Configuration Protocol) server, which provides the TCP/IP configuration for all the PC(s) that are connected to the router on the LAN.

Figure 4-49 DHCP Settings

¾DHCP Server - Enable or Disable the DHCP server. If you disable the server, you must have another DHCP server within your network or else you must configure the computer manually.

¾Start IP Address - Specify an IP address for the DHCP Server to start with when assigning IP addresses. 192.168.1.100 is the default start address.

¾End IP Address - Specify an IP address for the DHCP Server to end with when assigning IP addresses. 192.168.1.199 is the default end address.

¾Address Lease Time - The Address Lease Time is the amount of time a network user will be allowed connection to the router with their current dynamic IP Address. Enter the amount

- 64 -