H5R & H5E AV500 Hybrid Wi-Fi Starter Kit

¾MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is 1500 Bytes. It is not recommended that you change the default MTU Size unless required by your ISP.

¾Use These DNS Servers - If your ISP gives you one or two DNS addresses, select Use These DNS Servers and enter the primary and secondary addresses into the correct fields. Otherwise, the DNS servers will be assigned dynamically from your ISP.

) Note:

If you find error when you go to a website after entering the DNS addresses, it is likely that your DNS servers are set up improperly. You should contact your ISP to get DNS server addresses.

¾Host Name - This option specifies the host name of the router.

¾Get IP with Unicast DHCP - A few ISPs' DHCP servers do not support the broadcast applications. If you cannot get the IP Address normally, you can choose this option. (It is rarely required.)

Click the Save button to save your settings.

2.If your ISP provides a static or fixed IP Address, Subnet Mask, Gateway and DNS setting, select Static IP. The Static IP settings page will appear, shown in Figure 4-4.

Figure 4-4 WAN - Static IP

¾IP Address - Enter the IP address in dotted-decimal notation provided by your ISP.

¾Subnet Mask - Enter the subnet Mask in dotted-decimal notation provided by your ISP, usually is 255.255.255.0.

¾Default Gateway - (Optional) Enter the gateway IP address in dotted-decimal notation provided by your ISP.

- 26 -

Page 37
Image 37
TP-Link H5S manual H5R & H5E AV500 Hybrid Wi-Fi Starter Kit