H5R & H5E AV500 Hybrid Wi-Fi Starter Kit
- 104 -
4.19 IP & MAC Binding Setting Figure 4-104 IP & MAC Binding menu
There are two submenus under the IP & MAC Binding menu (shown in Figure 4-104): Binding
Settings and ARP List. Click any of them, and you will be able to scan or configure the
corresponding function. The detailed explanations for each submenu are provided below.
4.19.1 Binding Settings
Choose menu “IP & MAC Binding → Binding Settings”, and then you can bind IP addresses
and MAC addresses on the following screen.
Figure 4-105 Binding Setting
¾ MAC Address - The MAC address of the controlled computer in the LAN.
¾ IP Address - The assigned IP address of the controlled computer in the LAN.
¾ Bind - Check this option to enable ARP binding for a specific device.
¾ Modify - To modify or delete an existing entry.
To add IP & MAC Binding entries, follow the steps below:
1. Click the Add New... button. The IP & MAC Binging Settings page will appear.
2. Enter the MAC address and IP address.
3. Select the Bind checkbox.
4. Click the Save button to save it.