TP-Link H5R, H5S manual Part Description, ¾ Side panel, Button Description

H5R & H5E

AV500 Hybrid Wi-Fi Starter Kit

The following parts are located on the router’s front panel.

	Part			Description
	Wireless	Use these antennas to receive and transmit wireless data.
	antennas
	ON/OFF switch	Use this switch to power on/off the router.
	Power socket	Use this socket to connect the power adapter that is provided with
		the router.
	WIFI ON/OFF	Use this switch to enable or disable the wireless function.
	switch
	WAN port	Use this port to connect the DSL/cable modem or Ethernet.
	(Internet port)
	LAN ports	Use these ports to connect local PC(s) to the router.
	(Ethernet ports)
	USB port	Use this port to connect a USB storage device or USB printer.
			Table 1-2 Part description
¾ Side panel

		Figure 1-3 Side panel
Two buttons are located on the router’s side panel.
	Button	Description
	AP CLONE	Use this button to perform AP clone. For details, please refer to
	/PAIR	3.2.2 Unify and Extend the Network via AP Clone.
		Press this button for less than 5 seconds to enable the WPS
		function. If your client device such as wireless adapter supports
		WPS (Wi-Fi Protected Setup), use this button to automatically
	RESET/WPS	establish a WPA secure connection between the client device and
		the router.
		Press this button for more than 10 seconds to restore the router to
		factory defaults.
		Table 1-3 Button description
		- 6 -