Transition Networks Appendix A: FBRM/BFFG Part Numbers
FBRM copper-to-fiber part numbers, continued Single-fiber
model pairs The models shown in Table 15 are single-fiber and must be installed in pairs.
Table 15: FBRM10xx-1xx Single-Fiber Model Pairs
Part Number Port 1: Copper Port 2: Fiber
10/100Base-T 100Base-FX
CFBRM1029-100** RJ-45 SC, 100Base-FX BX-U 1310 nm
100m (328ft) CFBRM1029-110** DMI TX/1550nm RX
SFBRM1029-100** SM
20 km (12.4 miles) SFBRM1029-110** DMI RJ-45 SC, 100Base-FX BX-D 1550 nm
CFBRM1029-101** 100m (328ft) TX/1310 nm RX
CFBRM1029-111** DMI SM
SFBRM1029-101** 20 km (12.4 miles)
SFBRM1029-111** DMI RJ-45 SC, 100Base-FX BX-U 1310 nm
CFBRM1029-102*** 100m (328ft) TX/1550nm RX
CFBRM1029-112*** DMI SM
SFBRM1029-102*** 40 km (24.9 miles)
SFBRM1029-112*** DIM RJ-45 SC, 100Base-FX BX-D 1550 nm
CFBRM1029-103*** 100m (328ft) TX/1310nm RX
CFBRM1029-113*** DMI SM
SFBRM1029-103*** 40 km (24.9 miles)
SFBRM1029-113*** DMI
BX-D (down stream) BX-U (up stream)
Note: The distances for Port 1 listed in Table 15 are typical maximum distances; the
physical characteristics of the network dictate actual distances.
**FBRM-100 and -101, -110 and -111 Device pairs require installation in the same
network, where one is the local Device and the other its remote peer.
***FBRM-102 and -103, -112 and -113 Device pairs require installation in the same
network, where one is the local Device and the other its remote peer.
Continued on next page
110 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600