Transition Networks Section lV: FBRM/BFFG Initial Device Setup
Initial Device setup via chassis agent MMU, web-based, continued IP config via
DHCP To configure the IP via DHCP, do the following:
Step Action
1. A DHCP server must be on the network and accessible.
2. On the local switch configuration screen, enable DHCP.
3. On the local switch configuration screen set item Reset Switch to “Yes.”
4. Click the SAVE/EXECUTE button to start the DHCP process.
Note: To verify that the DHCP IP configuration was successful, check the IP
configuration for the Device on the local switch screen and note the changes
to the IP configuration.
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 43