Section ll: FBRM/BFFG Hardware Installation Transition Networks
Connecting power (standalone models)
Chassis powers
slide-in Device Transition Networks’ Point System chassis powers the CFBRM/CBFFG chassis
Devices.
Adapter powers
standalone Use an AC power adaptor to power the SFBRM/SBFFG standalone Device. To
connect power to the Device, do the following:
Step Action
1. Connect the barrel connector on the power adapter cord to the power
connector on the Device (located on the rear of the Device).
See Figure 16.
Figure 16: Standalone Device Power Connector
2. Connect the power adapter plug into AC power.
3. Verify that the Device has powered UP—the power indicator LED will be
lit.
22