Transition Networks Section lll: FBRM/BFFG1 Driver Installation & COM Port Setup
Installing USB driver
USB driver The driver installation instructions are for Windows XP only. Installing the USB
driver using Windows 2000 is similar, but not necessarily identical to the following
Windows XP driver-installation procedure.
Note: The following USB drivers are provided with the product on a CD, also
available at www.ftdichip.com (click on drivers): WinXP64, Win Server
2003, Win 2002, Win ME/98, Mac OS X, 9, 8, and Linux.
Installing USB
driver To install the USB driver on a computer with a Windows XP OS, do the following:
Step Action
1. Extract the driver (provided CD or from website) and place it in an
accessible folder on the local drive.
2. Plug the Device into the USB port on the PC to bring up the “found new
hardware” wizard dialog box, shown in Figure 17.
3. Select RADIO button, “No, not this time” as shown in Figure 17.
Figure 17: Found New Hardware Wizard Dialog Box
Continued on next page
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 25