Transition Networks Section Vll: FBRM/BFFG Operation
Firmware upgrades, continued
Accessing the bootloader CLI (continued)
Step Action
At the BOOT:> prompt type the letter “t” to establish TFTP as the reboot
method.
3.
At the BOOT:> prompt type the letter “s” to view system information, as
shown in Figure 67.
4.
System configuration:
IP Address : 192.251.144.150
Subnet Mask : 255.255.255.0
Default Gateway : 192.251.144.2
MAC Address : 00:c0:f2:00:d1:bc
TFTP Server address : 0.0.0.0
TFTP Filename :
BOOT:>
Figure 67: System Configuration Information
5. If system configuration parameters are entered incorrectly or missing as
shown above, at the BOOT:> prompt type the letter “n.”
6. Press the ENTER key until the desired parameter appears on the screen
(TFTP Filename []). See Figure 68.
BOOT:>
Enter the Network configuration -
IP Address [192.251.144.150]:
Subnet Mask [255.255.255.0]:
Gateway [192.251.144.2]:
TFTP Server IP [0.0.0.0]:
TFTP Filename []:
Figure 68: Network Configuration Screen
7. Enter the necessary data.
8. When done, press the letter “r” key to reboot the Device. The firmware
image will be burned to flash memory of the Device. When completed,
the Device will reboot and return to the Login> prompt.
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 81