Section IV: FBRM/BFFG Initial Device Setup Transition Networks
Initial Device setup IP web-based (directly to Device), continued
IP config via
DHCP To set up the IP configuration via DHCP, do the following:
Step Action
1. A DHCP server must be on the network and accessible.
2. On the local switch configuration screen, enable DHCP as shown in Figure
44.
Figure 44: IP-based Local System Configuration Screen
3. Click the Local REBOOT button at the top of the screen to start the DHCP
process.
Note: To verify that the DHCP IP configuration was successful, check the IP
configuration for the Device on the local system configuration screen and
note the changes to the IP configuration.
Continued on next page
46