Section Vl: FBRM/BFFG Software Features Transition Networks
Software feature descriptions, continued
Table 3: Device Software Configurable Feature (continued)
Feature Description
OAM Exchange of
configuration
information and remote
upgrades with
organizational specific
PDUs ( IEEE 802.3ah-
2004 standard)
The remote peer Device (only if a TN
FBRM/BFFGDevice) set to passive mode can be
completely managed through the SNMP/Web
management by its active peer Device when set to
Active Mode. This is done using organizational specific
PDUs. When the active peer upgrades to a new revision
of firmware, it detects the firmware configuration of its
remote peer Device and upgrades it automatically.
If the active peer is in a chassis, the remote peer can be
managed through Point System management by the
management module unit (MMU).
Link Status Failure
Indications Link status failure indication with OAM PDU flags
fielded and sent as an OAM critical event (refer to
57.4.2.1 of the standard).
Standard MIB Counters The Device provides complete management through the
SNMP interface. It supports the following standard
MIBs for management using SNMPv1:
• RFC 1213 (MIB-II)
• RFC 2819 (RMON – statistics group)
• RFC 2863 (IF MIB counters)
• RFC 3635 (Ether-like MIB counters)
• RFC 1493 (Bridge MIB object counters)
• RFC 2674 (Bridge extensions counters)
Continued on next page
66 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600