Transition Networks
Section live: Initial Device Setup Introduction There are four ways to set up the FBRM/BFFG 1xxx-1xx Devices before the Device
can be operated and managed:
• USB CLI
• Telnet
• Chassis MMU (chassis model)
• IP-based (directly to FBRM/BFFG)
The factory default IP configuration is the following:
• IP address: 192.168.1.1
• Subnet Mask: 255.255.255.0
• Gateway: 192.168.1.2
In this section These are the topics:
Topic See Page
USB CLI access 33
Initial Device setup via USB CLI 35
Initial Device setup via Telnet (directly to Device) 38
Initial Device setup via chassis agent (MMU) web-based 41
Initial Device setup via IP web-based (directly to Device) 44
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 32