Transition Networks Section lX: FBRM/BFFG Cable & Fiber Optic Specifications
Fiber optic cable and connector specifications Fiber cable
characteristics Cable physical characteristics must meet or exceed IEEE 802.3™ specifications.
Parameter Specification
Bit Error Rate: <10-9
Single mode fiber: 9 µm
Multimode fiber: 62.5/125 µm
Multimode fiber: 100/140, 85/140, 50/125 µm
Copper-to-fiber
connectors The following are FBRM10xx-1xx copper-to-fiber connector specifications.
Fiber Optics Specifications
CFBRM1011-100 1300 nm multimode
SFBRM1011-100 min: -19.0 dBm max: -14.0 dBm
Fiber-optic transmitter power: min: -30.0 dBm max: -14.0 dBm
Fiber-optic receiver sensitivity: 11 dB
Link budget:
CFBRM1013-100 1300 nm multimode
SFBRM1013-100 min: -19.0 dBm max: -14.0 dBm
Fiber-optic transmitter power: min: -30.0 dBm max: -14.0 dBm
Fiber-optic receiver sensitivity: 11 dB
Link budget:
CFBRM1014-100 1310 nm single mode
SFBRM1014-100 min: -15.0 dBm max: -8.0 dBm
Fiber-optic transmitter power: min: -31.0 dBm max: -8.0 dBm
Fiber-optic receiver sensitivity: 16 dB
Link budget:
CFBRM1015-100 (long haul)
SFBRM1015-100 (long haul) 1310 nm single mode
Fiber-optic transmitter power: min: -8.0 dBm max: -2.0 dBm
Fiber-optic receiver sensitivity: min: -34.0 dBm max: -7.0 dBm
Link budget: 26 dB
WARNING: Visible and invisible laser radiation when open. Do not stare into the
beam or view the beam directly with optical instruments. Failure to observe this
warning could result in an eye injury or blindness.
WARNING: Use of controls, adjustments or the performance of procedures other
than those specified herein may result in hazardous radiation exposure.
Continued on next page
90 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600