Transition Networks Appendix D: IP-Based and Chassis Management Parameters
Table 28: Port Configuration Parameters (continued)
Parameter IP based Chassis Description
9
VTU Priority
Override When enabled, the port checks the frames
for VLAN IDs that have the VTU Priority
override bit set in the VLAN database. It
then replaces the priority of the frames
with the priority specified in the VLAN
entry, which has a higher priority than the
default of the frame and IP/IEEE
priorities. Normal frame priority
processing occurs when disabled.
Static MAC
and VLAN
tables
The static MAC and VLAN tables are supported only through IP-based management
and not through chassis-based management. The chassis supports RMON MIB
counters only on ports. The IP-based management supports public MIB counters
such as RMON, IFmib. Ether-like MIB, EFM OAM HUB MIB, and port counters
directly from the switch.
Note: The MIBs used by the chassis agent for the FBRM/BFFG Device and the
MIB used by IP-based management are different.
The chassis agent does not support the EFM hub MIB. If the remote Device
is OAM capable, but not a FBRM/BFFG Device from Transition Networks,
the EFM hub MIB will be queried for OAM status.
140 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600