Section Vll: FBRM/BFFG Operation Transition Networks
Status LEDs Status
monitoring
LEDS
The FBRM series Devices are designed to operate without user intervention. Use the
status LEDs to monitor Device operation, once it has been installed in the network.
See Figure 59.
Figure 59: FBRM Device LEDs
LED status
tables Tables 5, 6, and 7 explain the status of the power, USB, twisted pair (TP), and fiber
LEDs.
Table 5: Power and USB LEDs FBRM Devices
LEDs Color Status
Power Green ON has power/OFF no power
USB Green Blinking activity/OFF no activity
Table 6: TP Bi-Color LEDs FBRM Devices
TP LEDs Color Status
Yellow Half duplex TPLink/activity:
ON link, BLINK activity
Duplex
Green Full duplex TPLink/activity:
ON link, BLINK activity
Half Duplex/Link/Active Yellow ON Link, blinking activity
Full Duplex/Link/Active Green ON Link, blinking activity
Speed Yellow ON 10Mbs
Green ON 100Mbs
Table 7: Fiber LEDs FBRM Devices
Fiber LEDs Color Status
Link Active Green ON link, blinking activity
Duplex Green ON full, OFF half
Continued on next page
72 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600