Transition Networks Appendix C: Device Commands & Definitions
Command Description
snmpwalk SNMP walk of the entire MIB tree if no options are
specified or from OID from the last query if 'continue' is
specified.
Usage: snmpwalk <continue>
sys The system group variables of MIB-II can be configured
using the ‘sys’ command. The system contact, name,
and location can be set.
Usage: sys
[contact=<"value">
(max=64)
]
[name=<"value">
(max=64)
]
[location=<"value">
(max=64)
]
tftpupgrade Upgrades the firmware running on the Device using
TFTP protocol. The tftp server IP and tftp filename
should be configured using the “set” command, or can
be given as arguments to this command.
Usage: tftpupgrade erver=nn.nn.nn.nn filename=<"filename">
xmodemupgrade Upgrades the firmware running on the Device, using
XModem protocol. The command invokes the
bootloader and start an XModem transfer to upgrade the
firmware.
128 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600