The following features are available on the Live Video page:
Pan/Tilt
Video Window Size
Zoom
Brightness
Sound on/off
Snapshot
Record Video
Live Video
Setup (admin only)
Reset (admin only)
Help
About
Clicking any of the yellow directional buttons will cause the camera to move one small step in that direction. Click and hold the left mouse key down to make the camera move one large step. When the camera reaches its end of travel, the buttons for that direction are grayed out and disabled.
You can select one of the three available image sizes. Note: Changing the window size only changes the size of the image on your display and does not affect the image being sent by the camera. Only an administrator can change the size of the image streamed from the camera. Refer to Section 3.3 Camera Configuration for more information.
Use the Digital Zoom to zoom the picture 2X.
Adjusts the brightness level of the image.
Enables or disables audio monitoring.
Clicking on Snapshot will open a menu with three functions, Snapshot, Save, and Cancel. Click Snapshot to capture the current image. Click Save to save the image to your hard drive. Click Cancel to discard the image.
Clicking on Record Video will open a menu with four functions, Start, Preview, Save, and Cancel. Click Start to start capturing video. Click Stop to stop capturing. Click Preview to open Windows Media Player and playback the video. Click Save to save the video to your hard drive. Click Cancel to discard the video.
Takes you back to the main viewing page.
Opens the camera setup pages where you can access all of the camera’s configuration settings.
Resets the camera. Resetting has the same effect as turning the power off and then on. Note: You must log in again after a reset.
Takes you to the Technical Support section of the Veo Observer website. Provides the version information.
Page 14 of 65
