Figure 5-12 Selector Tools
5.7.1.1 Location87BSelector
The Location Selector lets you select the camera you want to view from (refer to
FigureX5-12)X . The location information is the same as the location name associated with the dedicated channel in the Monitor program. If there are more than one time
segments in the same location, another dialog will appear (as shown in FigureX5-13)X . You must select an interval in that dialog. If your selection is correct, the Playback program will automatically switch to that location and start to display.
Figure 5-13 Time Interval Selection Dialog
5.7.1.2 Period88BSelector
Period Selector provides you a precise way to choose the start time and the end time of a new period. The end time should be larger than the start time. After you have given the correct start and end times, clicking on the “Play” button in the Jog Dial. The system will display the new period in the display area and change the period start and the end time labels. The Pull Bar and Histogram Area will be changed, too. If the selected period is not present in the database, the data in the period selector will be changed back to the previously correct start and end times and a warning message
