|
| 12 To end the menu operation, set the MENU ON/OFF switch to OFF | |
|
| or close the cover of the menu operating section. | |
|
| The menu disappears from the viewfinder screen and the message | |
|
| “MANU INTERVAL *FRAME”, indicating the single trigger mode | |
3 |
| of the Manual Interval Rec mode, appears along the bottom of the | |
| viewfinder. | ||
|
| *FRAME indicates the number of frames set in step 6. | |
|
| The display indicating the current status of the camcorder appears | |
|
| along the top and bottom of the viewfinder. | |
|
|
|
|
|
| Note | |
|
| The settings for the single trigger mode of the Manual Interval Rec mode | |
|
| are maintained until changed. However, if you switch the camcorder | |
|
| power off, Manual Interval Rec mode settings are cleared except for the | |
|
| NUMBER OF FRAME setting and the single trigger mode selection. To | |
|
| use the single trigger mode of the Manual Interval Rec function again | |
|
| after switching on the power, perform steps 1 to 2. | |
|
| Camcorder operation in the single trigger mode of the | |
|
| Manual Interval Rec mode | |
|
| Follow the procedure below to shoot a picture in the single trigger mode | |
|
| of the Manual Interval Rec mode. | |
|
|
|
|
|
| Note | |
|
| When you use cassettes on which nothing is recorded, such as brand new | |
|
| cassettes, be sure to record color bars for more than 2 seconds at the | |
|
| beginning of a cassette. | |
|
| 1 After performing the basic procedure for shooting and recording | |
|
| following the instructions in | |
|
| secure the camcorder so that it will not move. | |