3 | Set the iris switch on the lens to AUTO and point the camera at | ||
| objects of different brightness. Check that the automatic iris | ||
| adjustment operates correctly. | ||
4 | Set the iris switch on the lens to MANUAL and check that turning | ||
| the iris ring manually adjusts the iris correctly. | ||
5 | Set the iris switch on the lens back to AUTO and check the | ||
| following points when the GAIN selector is moved from L to M to | ||
| H. | ||
| • For objects of the same brightness, the iris is adjusted to | ||
| correspond to the change in setting. | ||
| • The gain indicator on the viewfinder screen changes to correspond | ||
| to the change in setting. |
| |
6 | 6 | ||
If an extender mechanism is incorporated in your lens, put the | |||
| |||
extender lever of the lens into the 2x position and check the following points.
• EX display appears at the left top on the viewfinder.
• The auto iris functions correctly.
Perform tests (1) to (7) consecutively.
(1) Testing the tape transport functions
1 Set the VTR SAVE/STBY switch to SAVE and check that the VTR SAVE indicator in the viewfinder goes on.
2 Set the VTR SAVE/STBY switch to STBY and check that the VTR SAVE indicator in the viewfinder goes off.
3 Set the | (Continued) |
Chapter 6 Maintenance |