Testing the viewfinder
1
2 Check that the color bars are displayed in the viewfinder, and adjust the BRIGHT, CONTRAST, and PEAKING controls to give the best color bar display.
3 Check each of the following operations.
•The menu is displayed on the viewfinder screen.
•Turn the MENU knob and check that the menu page changes to the next page.
•Push the MENU knob and check that settings of each item of the selected page are displayed.
•Turn the MENU knob and check that the arrow (→) mark moves
within the page. | 6 |
| |
• Push the MENU knob and check that the arrow (→) mark placed |
|
before the item changes to the circle (z) and the circle (z) placed |
|
before the setting of the item changes to the question mark (?). |
|
• Turn the MENU knob and check that the setting of the selected |
|
item or ON/OFF changes. |
|
4 Set the OUTPUT/DCC switch to CAM, and change the ND FILTER |
|
selector position in the sequence of 1, 2, 3, 4. |
|
Check that the FILTER indicator on the viewfinder screen displays |
|
the correct numbers. |
|
5 Check each of the following operations and make sure that the 
indicator lights if the corresponding item has been turned on in the ‘!’ LED page of the USER menu.
•Set the gain to anything but 0 dB by using the GAIN selector and the GAIN SW page of the OPERATION menu.
•Set the SHUTTER selector to ON.
•Set the WHITE BAL switch to PRST.
(Continued)
Chapter 6 Maintenance |