To cancel the setting/to reset the setting to the initial setting
You can cancel the setting and reset it to its initial value (one set at the factory, or preset value) by pushing the CANCEL/PRST / ESCAPE switch to CANCEL/PRST before pushing the MENU knob in step 7.
When the CANCEL/PRST / ESCAPE switch is set to CANCEL/ PRST, the message “CANCEL?” appears. To cancel the previous setting, push the CANCEL/PRST / ESCAPE switch to CANCEL/
PRST again.4 To reset the setting to the initial value, push the CANCEL/PRST / ESCAPE switch to CANCEL/PRST a third time. The message “PRESET?” appears. To reset to the initial setting, push the CANCEL/PRST / ESCAPE switch to CANCEL/PRST once more.
The action of the CANCEL/PRST function differs for some setting items. Some items are only affected by PRST. Check the setting procedure for each item for more information.
To interrupt changing the settings
By setting the MENU ON/OFF switch to OFF, the menu disappears from the viewfinder screen. By setting the MENU ON/OFF switch to ON again, the values that were displayed when you interrupted the setting operations will reappear so you can continue making settings.
7 Push the MENU knob.
The z mark at the left of the selected item changes to a t mark and the ? mark at the left of the setting changes to a z mark. The setting is executed.
8 To continue setting other items in the same page, repeat steps from 4 to 7.
Chapter 4 Adjustments and Settings for Recording