4-7-4 Setting the Marker Display

Use the MARKER page of the USER menu to switch the display of the center and safety zone markers on or off and to select whether the area indicated by the safety zone marker is 80%, 90% or 100% of the screen area.

Note

When an HKDW-702 is installed and the NTSC viewfinder and/or the

NTSC monitor are connected, all markers and zebra patterns are not 4 displayed if DOWN CON MODE is set to CROP on the OUTPUT SEL

page of the USER menu, even if the marker display is set to ON.

CANCEL/PRST /

ESCAPE swtich

MENU knob

MENU ON/OFF switch

1 Set the MENU ON/OFF switch to ON.

The page that was on the screen when the last menu operation ended appears on the viewfinder screen.

2 Turn the MENU knob until the MARKER page appears, and push the MENU knob.

(Continued)

Chapter 4 Adjustments and Settings for Recording 4-75